Three Colour Sandal Injection Moulding Machine, HB320Q/HB324Q
| Item | Unit | | |
| Raw materials | TPR, PVC, PUR (blowing) | ||
| Stations | 20 | 24 | |
| Screw diameter | mm | 70+50*2 | |
| Maximum injection volume | CC | 769+390*2 | |
| Injection pressure | MPa | 70*3 | |
| Clamping force | Tons | 80*2 | |
| Yield | Pairs/hour | 80-150 | 100-200 |
| Mould space | mm | 500*240*240 | |
| Heating power | kW | 9+6.5*2 | |
| Total power | kW | 68 | |
| Dimensions | cm | 710×530×220 | 780×600×220 |
| Machine weight | Tons | 12.1 | 13.3 |
| Oil consumption | L | 600*2 | |
-
V type mould structure
-
Mould manipulator
-
Energy-saving hydraulic servo control system
HB320Q Three Colour Sandal Injection Moulding Machine
SONC has been manufacturing injection moulding machines for years. Our portfolio includes machine for soles or sandals. Take this three colour sandal injection moulding machine for example. It is used for producing single-colour, two-colour and three-colour foam or non-foam soles, sandals and slippers. The applicable materials are TPR, PVC and PUR. This shoe making machine is equipped with 12 sets of molds, meaning that it can produce 12 pairs of shoe soles at a time.
Read More- Bonding is achieved by non-adhesive technologies that feature tight bonding performance;
- Efficient air blowing system is configured to improve the quality and reduce the weight of the goods to be made;
- Block cylinder is made with an unique structure that is highly resistant to heat and leakage;
- Screw rods are made through special techniques, ensuring exclusive durability;
- Pre-heating system is optional to reduce defective rate;
-
The PLC control system with industrial human-machine interface (HMI) is easy to use;
-
PLC control system
-
PLC
-
HMI interface
-
-
Servo motor and automatic mould manipulator are optional to save energy and reduce labour intensity;
-
Servo system
-
-
These safety measures have been adopted:
-
Safety sign
-
Safety door with photoelectric switch
-
Safety door with photoelectric switch
-
Emergency stop button
-
Rotary table anti-lifting switch
-
The purposes of these measures are to protect operators.
- Safety door is installed to allow operators to shut down the injection machine when malfunctions happen.
- Photoelectric switch can stop the injection moulding machine if operators accidentally extend their hands into the working machine.
- Turn table anti-lift switch sends electric signals to shut down the injection moulding machine to prevent the turn table from moving away from the wheel.
- Emergency stop button allows operators to close the injection moulding machine when something unusual happens.
- Safety net is set up to prevent misoperation.
- The safety sign indicates potentially dangerous zones.
-
Cooling tower is installed to bring down the temperature of hydraulic oil and raw materials;
-
Crusher is used to recycle used materials;
-
Vertical mixer blends materials with different colours and turn them into the same colour;
-
Air compressor will be connected to the injection moulding machine to supply air;
-
Drying system eliminates water in air so as to avoid bubbles in finished products and make better foam soles;
| Parts list | ||
| Toolbox | / | 1pc |
| Allen key | 1.5-10 | 9 sets |
| Open-end wrench | 6-24 | 8 sets |
| Phillips screwdriver (small) | / | 2pcs |
| Phillips screwdriver (large) | / | 1pc |
| Adjustable wrench | 250mm | 1pc |
| Heating ring | Ø120*80 mm | 1pcs |
| Heating ring | Ø90*80 mm | 1pcs |
| Heating ring | Ø65*50 mm | 1pc |
| Heating rod | Ø15.8*100 mm | 2pcs |
| Proximity switch | Ø 25*25mm | 1pc |
| Proximity switch | Ø 12*12mm | 1pc |
| Thermoelectric coupling | K type/5M | 2pcs |
| Oil seal | / | 2pcs |
| Plugging rod | / | 1pc |
| Plugging bushing | / | 1pc |
| Copper gasket | / | 1pc |
| Injection nozzle | / | 1pc |
| User manual | / | 1 |
SONC is a team of shoe machine experts with firm commitment to providing global footwear manufacturing plants with premium shoe manufacturing equipment. Our portfolio of footwear making machine mainly covers shoe sole making machines, sandal making machines, slipper making machines, flip flop strap making machines and rain boot making machines. Apart from our shoe machines, we also provide injection moulding machines for making other plastic or rubber products, such as mobile phone case making machine and rubber tyre making machine. As a specialist shoe injection moulding machine manufacturer, SONC can provide footwear machinery suitable for handling various materials including TPU, PVC, TPR, TR and EVA. Please get in touch with us if you are interested in our shoes machines or injection moulding equipment for other plastic and rubber products.
