Two Colour Sandal Injection Moulding Machine, EB224Q
This sandal injection moulding machine produces single-colour and two-colour foam or non-foam soles, sandals and slippers. The footwear can be made out of raw materials like TPR, PVC and PUR. Apart from these advantages, this injection moulding machine is equipped with 24 sets of molds and can produce as many as 12 pairs of shoes at a time, which will definitely strengthen production rate to maximize profits.
| Item | Unit | |
| Raw materials | TPR, PVC, PUR (blowing) | |
| Stations | 24 | |
| Screw diameter | mm | 65+50 |
| Maximum injection volume | CC | 660+390 |
| Injection pressure | MPa | 70*2 |
| Clamping force | Tons | 80*2 |
| Yield | Pairs/hour | 100-180 |
| Mould space | mm | 500*240*270 |
| Heating power | kW | 16.5 |
| Total power | kW | 49.5 |
| Dimensions | cm | 750×750×220 |
| Machine weight | Tons | 13.8 |
| Oil consumption | L | 650*2 |
-
Water cooling system
-
V type mould structure
-
Mould manipulator
-
Energy-saving hydraulic servo control system
EB224Q Two Colour Injection Moulding Machine
EB224Q two colour injection moulding machine is a kind of footwear making machine that adopts materials like PVC, PUR, and TPR to produce one- or two-colour soles, slippers, sandals, and leather shoes. This shoe injection moulding machine allows for placing up to 24 shoe moulds (12 pairs of shoes), this helps extend the cooling time of moulds after injection moulding, therefore resulting in a higher output of finished products while ensuring the quality of shoes.
Read More- Bonding is achieved by non-adhesive technologies that feature tight bonding performance;
- Screw rod is made through special techniques that ensure durable and effective performance;
- Block cylinder is made in an unique structure that blocks heat and leakage;
- Pre-heating system is optional to reduce defective rate;
-
Efficient air blowing system is configured to improve the quality and reduce 30% weight of the goods to be made;
-
-
Standard industrial human-machine interface (HMI) and PLC control system are installed;
-
PLC control system
-
PLC
-
HMI interface
-
-
Servo system is also optional, which will save energy and reduce costs;
-
-
Following safety measures have been adopted to ensure stable and safe operation;
-
Safety sign
-
Safety door with photoelectric switch
-
Safety door with photoelectric switch
-
Emergency stop button
-
Rotary table anti-lifting switch
-
The purposes of these measures are to protect operators. The safety sign indicates potentially dangerous zones; photoelectric switch can stop the injection moulding machine if operators accidentally extend their hands into the working machine; emergency stop button allows operators to close the injection moulding machine when something unusual happens; turn table anti-lift switch sends electric signals to shut down the injection moulding machine to prevent the turn table from moving away from the wheel.
In addition to the above-mentioned measures, this injection press is equipped with other devices. Safety door is installed to allow operators to shut down the injection machine when malfunctions happen; safety net is set up to prevent misoperation.
-
Cooling tower is installed to bring down the temperature of hydraulic oil and raw materials;
-
Crusher is used to recycle used materials;
-
Vertical mixer blends materials with different colours and turn them into the same colour;
-
Air compressor will be connected to the injection moulding machine to supply air;
-
Drying system eliminates water in air so as to avoid bubbles in finished products and make better foam soles;
| Parts list | ||
| Toolbox | / | 1pc |
| Allen key | 1.5-10 | 9 sets |
| Open-end wrench | 6-24 | 8 sets |
| Phillips screwdriver (small) | / | 2pcs |
| Phillips screwdriver (large) | / | 1pc |
| Adjustable wrench | 250mm | 1pc |
| Heating ring | Ø90*80 mm | 1pc |
| Heating ring | Ø65*50 mm | 1pc |
| Heating ring | Ø120*80 mm | 2pcs |
| Heating ring | Ø70*50 mm | 1pc |
| Heating rod | Ø15.8*100 mm | 2pcs |
| Proximity switch | Ø 25*25mm | 1pc |
| Proximity switch | Ø 12*12mm | 1pc |
| Thermoelectric coupling | K type/5M | 2pcs |
| Oil seal | / | 2pcs |
| Plugging rod | / | 1pc |
| Plugging bushing | / | 1pc |
| Copper gasket | / | 1pc |
| Injection nozzle | / | 1pc |
| User manual | / | 1 |
SONC is a team of shoe machine experts with firm commitment to providing global footwear manufacturing plants with premium shoe manufacturing equipment. Our portfolio of footwear making machine mainly covers shoe sole making machines, sandal making machines, slipper making machines, flip flop strap making machines and rain boot making machines. Apart from our shoe machines, we also provide injection moulding machines for making other plastic or rubber products, such as mobile phone case making machine and rubber tyre making machine. As a specialist shoe injection moulding machine manufacturer, SONC can provide footwear machinery suitable for handling various materials including TPU, PVC, TPR, TR and EVA. Please get in touch with us if you are interested in our shoes machines or injection moulding equipment for other plastic and rubber products.
